Siemens F36885 fault code meaning
Siemens / F36885
Series: DCM-6RA80
DRIVE-CLiQ hub (CU): Cyclic data transfer fault
DC drive
Meaning: %2 Message class: Internal communication (DRIVE-CLiQ) fault (12) Drive object: DC_CTRL, DC_CTRL_R, DC_CTRL_R_S, DC_CTRL_S, TM150, TM15DI_DO, TM31 Component: Terminal board (TB) Propagation: LOCAL Response: None Acknowledgment: Immediate Cause: A DRIVE-CLiQ communication fault exists between the control unit and the associated DRIVE-CLiQ hub module. Node transmission and reception are not synchronized. Fault cause: 26 (= 1A hexadecimal): The sign-of-life bit is not set in the received telegram, and the telegram was received too early. 33 (= 21 hexadecimal): The cyclic telegram has not yet arrived. 34 (= 22 hexadecimal): Timing error in the telegram receive list. 64 (= 40 hexadecimal): Timing error in the telegram send list. 98 (= 62 hexadecimal): Error during transition to cyclic operation. Note on the message value: Detailed information in the message value (r0949/r212
Possible causes
Source: SINAMICS DCM, Parameter Manual, firmware version 1.5 SP2 (based on 5.1 SP2) P1193
Series: G120-CU250S-2
DRIVE-CLiQ hub (CU): Cyclic data transfer fault
converter
Meaning:
Possible causes
Source: SINAMICS G120 Control Units CU250S-2 P1200
Series: G130-G150
DRIVE-CLiQ hub (CU): Cyclic data transfer fault
converter
Meaning: %2 Message class: Internal communication (DRIVE-CLiQ) Fault (12) Drive object: B_INF, HUB, TM120, TM150, TM31, VECTOR_G Component: Terminal Board (TB) Propagation: LOCAL Reaction: None Acknowledgment: Immediate Cause: Fault in DRIVE-CLiQ communication between the Control Unit and the associated DRIVE-CLiQ Hub Module. Node transmission and reception are not synchronized. Fault causes: 26 (= 1A hexadecimal): The sign-of-life bit is not set in the received telegram, and the telegram was received too early. 33 (= 21 hexadecimal): The cyclic telegram has not yet arrived. 34 (= 22 hexadecimal): Timing error in the telegram receive list. 64 (= 40 hexadecimal): Timing error in the telegram send list. 98 (= 62 hexadecimal): Error during transition to cyclic operation. Note on the message value: Detailed information is encoded in the message value (r0949/r2124) as follows: 0000yyxx
Possible causes
Source: SINAMICS G130_G150 P1997