Siemens F36860 fault code meaning

Series: DCM-6RA80

DRIVE-CLiQ hub (CU): Telegram fault

DC drive

Meaning: %2 Message class: Internal communication (DRIVE-CLiQ) fault (12) Drive object: DC_CTRL, DC_CTRL_R, DC_CTRL_R_S, DC_CTRL_S, TM150, TM15DI_DO, TM31 Component: Terminal board (TB) Broadcast: LOCAL Reaction: None Acknowledgment: Immediate

Possible causes

Source: SINAMICS DCM, Parameter Manual, firmware version 1.5 SP2 (based on 5.1 SP2) P1191

Series: G120-CU250S-2

DRIVE-CLiQ hub (CU): Telegram fault

converter

Meaning: A DRIVE-CLiQ communication fault has occurred between the control unit and the associated DRIVE-CLiQ hub module. Fault causes: 1 (= 01 hexadecimal): Checksum error (CRC error. 2 (= 02 hexadecimal): The telegram is shorter than the specified byte length or the length specified in the receive list. 3 (= 03 hexadecimal): The telegram is longer than the specified byte length or the length specified in the receive list. 4 (= 04 hexadecimal): The received telegram length does not match the receive list. 5 (= 05 hexadecimal): The received telegram type does not match the receive list. 6 (= 06 hexadecimal): Power unit address mismatch between the telegram and the receive list. 9 (= 09 hexadecimal): An incorrect bit is set in the received telegram. 16 (= 10 hexadecimal): The telegram was received too early. 17 (= 11 hexadecimal): CRC error and the telegram was received too early. 18 (= 12 hexadecimal): The telegram is shorter than the specified byte length or the length specified in the receive list, and was received too

Possible causes

Source: SINAMICS G120, Control Unit CU250S-2 P1096

Series: G130-G150

CU DRIVE-CLiQ: Telegram error

converter

Meaning:

Possible causes

Source: G150 P1004

Series: S220

DRIVE-CLiQ hub (CU): Telegram error

converter

Meaning: %2 Component: Terminal board (TB) Broadcast: Local Reaction: None Acknowledgment: Immediate Faults and alarms 5.5 Fault and alarm list SINAMICS S220 Converter 2738 Parameter Manual, 08/2026, FW V6.7, A5E53307549F AB

Possible causes

Source: SINAMICS S220 converter P2740