Siemens F32501 fault code meaning
Siemens / F32501
Series: DCM-6RA80
Encoder 2: Encoder position outside tolerance range for position tracking
DC drive
Meaning: The distance traveled while the drive/encoder was powered off exceeded the set tolerance window. The reference between the mechanical system and the encoder has been lost.
Possible causes
Source: SINAMICS DCM, Parameter Manual, firmware version 1.5 SP2 (based on 5.1 SP2) P1137
Series: G120-CU250S-2
Encoder 2: Encoder position outside the tolerance range during position tracking
converter
Meaning: The distance traveled while the drive/encoder was powered off exceeded the set tolerance window. The reference between the mechanical system and the encoder no longer exists.
Possible causes
Source: SINAMICS G120, Control Unit CU250S-2 P1558
Series: G130-G150, S120-S150
Encoder 2: Encoder position outside tolerance range for position tracking
converter
Meaning: The distance traveled while the drive/encoder was powered off exceeded the set tolerance window. The reference between the mechanical system and the encoder no longer exists.
Possible causes
Source: SINAMICS G130_G150 P1867; SINAMICS S120_S150 P3054
Series: G220
Encoder 2: Encoder position outside tolerance range during position tracking
converter
Meaning: The distance traveled while the drive/encoder was powered off exceeded the set tolerance window. The reference between the mechanical system and the encoder has been lost.
Possible causes
Source: SINAMICS G220 Converter P1555
Series: S110
Encoder 2: Encoder position outside the tolerance range during position tracking
servo drive
Meaning: The distance traveled while the drive/encoder was powered off exceeded the set tolerance window. The reference between the mechanical system and the encoder no longer exists.
Possible causes
Source: SINAMICS S110 P1168