Siemens F31837 fault code meaning

Series: DCM-6RA80

Encoder 1 DRIVE-CLiQ: Component fault

DC drive

Meaning: %2 Message class: Internal communication (DRIVE-CLiQ) fault (12) Drive object: DC_CTRL, DC_CTRL_R, DC_CTRL_R_S, DC_CTRL_S Component: Sensor module encoder 1 Propagation: LOCAL Reaction: Encoder (IASC/DCBRK, None) Acknowledgment: Immediately

Possible causes

Source: SINAMICS DCM, Parameter Manual, firmware version 1.5 SP2 (based on 5.1 SP2) P1096

Series: G120-CU250S-2

Encoder 1 DRIVE-CLiQ: Component fault

converter

Meaning: %2 Drive object: CU250S_S, CU250S_S_CAN, CU250S_S_DP, CU250S_S_PN. Reaction: Encoder (IASC/DCBRK, none). Acknowledgment: Immediate. Cause: A fault was detected on the associated DRIVE-CLiQ component. This may be a hardware fault. Fault cause: 32 (= 20 hexadecimal): Telegram header error. 35 (= 23 hexadecimal): Receive error: Telegram buffer memory error. 66 (= 42 hexadecimal): Send error: Telegram buffer memory error. 67 (= 43 hexadecimal): Send error: Telegram buffer memory error. Note on the message value: Detailed information is encoded in the message value (r0949/r2124) as follows: 0000yyxx hexadecimal: yy = component number, xx = fault cause. See: p0491 (Motor encoder fault reaction "Encoder").

Possible causes

Source: SINAMICS G120, Control Unit CU250S-2 P1525

Series: G130-G150

Encoder 1 DRIVE-CLiQ: Component fault

converter

Meaning:

Possible causes

Source: G150 P942

Series: S110

Encoder 1 DRIVE-CLiQ: Component fault

servo drive

Meaning: %2 Drive object: SERVO_S110-CAN, SERVO_S110-DP, SERVO_S110-PN Reaction: Encoder (IASC/ DC brake, none) Acknowledgment: Immediate Cause: A fault has been detected in the associated DRIVE-CLiQ component. This may be a hardware fault.

Possible causes

Source: SINAMICS S110 P1139

Series: S210

Encoder 1 DRIVE-CLiQ: Component fault

servo drive

Meaning:

Possible causes

Source: SINAMICS S210_SIMOTICS S-1FK2 and S-1FT2 P939