Siemens F30655 fault code meaning
Siemens / F30655
Series: G110M, G115D, G120C, G120D
SI P2: Monitoring function comparison
converter
Meaning: An error was detected when comparing the Safety Integrated monitoring functions of processor 1 and processor 2. The two processors have no common program section for the supported SI monitoring function. - Communication between processors 1 and 2 is interrupted or faulty.
Possible causes
Source: SINAMICS G110M P751; SINAMICS G115D P806; SINAMICS G120C P721; SINAMICS G120D control unit CU240D- 2_CU250D- 2 P928
Series: G120-CU240B-E-2
SI P2: Monitoring function comparison
converter
Meaning: An error was detected when comparing the Safety Integrated monitoring functions of processor 1 and processor 2. The two processors have no common program section for the supported SI monitoring functions. - Communication between processors 1 and 2 was interrupted or an error occurred. Note: This fault results in STOP A, which cannot be acknowledged.
Possible causes
Source: SINAMICS G120 Control Unit CU240B_E-2 P696
Series: G120-CU250S-2
SI P2: Monitoring function comparison
converter
Meaning: An error was detected when comparing the Safety Integrated monitoring functions of processor 1 and processor 2. The two processors have no common program section for the supported SI monitoring function. - Communication between processors 1 and 2 is interrupted or faulty.
Possible causes
Source: SINAMICS G120, Control Unit CU250S-2 P1478
Series: G130-G150
SI MM: Align monitoring functions
converter
Meaning:
Possible causes
Source: G150 P921
Series: S210
SI P2: Monitoring function comparison
servo drive
Meaning: An error was detected when comparing the Safety Integrated monitoring functions of the two monitoring channels. The two processors have no common program section for the supported SI monitoring function. -DRIVE-CLiQ communication is faulty or interrupted.
Possible causes
Source: SINAMICS S210_SIMOTICS S-1FK2 P527