Siemens F30035 fault code meaning
Siemens / F30035
Series: DCM-6RA80
Power unit: Air inlet overheat
DC drive
Meaning: The cooling air supplied to the power unit exceeds the permissible temperature limit. The temperature limit for air-cooled power units is 55 degrees. - Ambient temperature too high. - Insufficient ventilation, fan fault.
Possible causes
Source: SINAMICS DCM, Parameter Manual, Firmware Version 1.5 SP2 (based on 5.1 SP2) P1044
Series: G110M, G120-CU240B-E-2, G120-CU250S-2, G120C, G130-G150, S120-S150
Power unit: Air inlet overheat
converter
Meaning: The cooling air in the power unit has exceeded the permissible temperature limit. The temperature limit for air-cooled power units is 55 degrees. - Ambient temperature too high. - Insufficient ventilation or fan fault.
Possible causes
Source: SINAMICS G110M P742; SINAMICS G120, control unit CU240B-2_CU240E-2 P768; SINAMICS G120, control unit CU250S-2 P1464; SINAMICS G120C P712; SINAMICS G130_G150 P1725; SINAMICS S120_S150 P2892
Series: G115D
"Air intake overtemperature"
converter
Meaning:
Possible causes
Source: SINAMICS G115D P687
Series: G120-CU230P-2, G120D, G120P-Cabinet
Air inlet temperature too high
converter
Meaning:
Possible causes
Source: Converter SINAMICS G120, equipped with control unit CU230P-2 P497; converter SINAMICS G120D, equipped with control unit CU250D-2 P332; SINAMICS G120P Cabinet P515
Series: G120X, G120XA
Power unit: Air inlet overheat
converter
Meaning:
Possible causes
Source: SINAMICS G120X converter P1411; SINAMICS G120XA PN converter P1321
Series: G200, G210, G210X, S220
Power unit: Air inlet overheat
converter
Meaning: The air inlet temperature of the power unit exceeded the permissible temperature limit. - Ambient temperature too high. - Insufficient ventilation, fan fault.
Possible causes
Source: SINAMICS G200 converter P757; SINAMICS G210 converter P1197; SINAMICS G210X converter P1023; SINAMICS S220 converter P2466
Series: G220
"air intake"
converter
Meaning:
Possible causes
Source: SINAMICS G220 Converter P1121
Series: S110
Power unit: Air inlet overheat
servo drive
Meaning: The cooling air in the power unit has exceeded the permissible temperature limit. The temperature limit for air-cooled power units is 55 degrees. - Ambient temperature too high. - Insufficient ventilation or fan fault.
Possible causes
Source: SINAMICS S110 P1080