Siemens F07925 fault code meaning
Siemens / F07925
Series: G110M, G115D
Tolerance exceeded for torque/speed
converter
Meaning:
Possible causes
Source: SINAMICS G110M P290;SINAMICS G115D P281
Series: G120-CU240B-E-2, G120-CU250S-2, G120D
Drive: Torque/speed out of tolerance
converter
Meaning: When p2193 = 1: The torque deviates from the torque/speed envelope. When p2193 = 2: The external encoder speed signal (see p3230) deviates from the speed (r2169).
Possible causes
Source: SINAMICS G120, Control Unit CU240B-2_CU240E-2 P746; SINAMICS G120, Control Unit CU250S-2 P1422; SINAMICS G120D Control Unit CU240D- 2_CU250D- 2 P898
Series: G120X
Tolerance exceeded for torque/speed
converter
Meaning:
Possible causes
Source: SINAMICS G120X Converter P1137
Series: G120XA
Drive: Torque/speed tolerance exceeded
converter
Meaning: When p2193 = 1: The torque deviates from the torque/speed envelope. When p2193 = 2: The speed signal from the external encoder (see p3230) deviates from the speed (r2169).
Possible causes
Source: SINAMICS G120XA USS converter P1251
Series: G130-G150, S120-S150
Drive: Torque/speed out of tolerance
converter
Meaning: The torque deviates from the torque/speed envelope.
Possible causes
Source: SINAMICS G130_G150 P1673; SINAMICS S120_S150 P2825
Series: G200
Drive: Torque/speed tolerance exceeded
converter
Meaning:
Possible causes
Source: SINAMICS G200 converter P725
Series: G210, G210X, G220, S220
Drive: Torque/speed tolerance exceeded
converter
Meaning: When p2193 = 1: The torque deviates from the torque/speed envelope. When p2193 = 2: The speed signal from the external encoder (see c3230) deviates from the speed (r2169).
Possible causes
Source: SINAMICS G210 converter P1160; SINAMICS G210X converter P988; SINAMICS G220 converter P1378; SINAMICS S220 converter P2365
Series: S110
Drive: Torque/speed out of tolerance
servo drive
Meaning: The torque deviates from the torque/speed envelope.
Possible causes
Source: SINAMICS S110 P1055
Series: S200
Drive: Torque/speed tolerance exceeded
servo drive
Meaning: The torque is outside the torque/speed envelope.
Possible causes
Source: SINAMICS S200 PROFINET_SIMOTICS S-1FL2 P543