Siemens F07448 fault code meaning
Siemens / F07448
Series: G120-CU250S-2
Load gearbox: Linear axis position tracking exceeded the maximum range
converter
Meaning: On the configured linear axis/non-modulo axis, the currently valid motor encoder (encoder 1) has exceeded the maximum permissible travel range. The maximum travel range on the configured linear axis is 64 times p0421 (+/- 32 times). This range can be read in p2721 and is interpreted as the number of load revolutions.
Possible causes
Source: SINAMICS G120, Control Unit CU250S-2 P1381
Series: G130-G150
Load gearbox: Linear axis position tracking exceeded the maximum range
converter
Meaning:
Possible causes
Source: SINAMICS G130_G150 P1617
Series: G210
Load gearbox: Linear axis position tracking exceeded the maximum range
converter
Meaning: On the configured linear axis/non-modulo axis, the currently active motor encoder has exceeded the maximum permissible travel range. The maximum travel range on the configured linear axis is 64 times p0421 (+/- 32 times). This range can be read in p2721 and is interpreted as the number of load revolutions. Note: Only the motor encoder in the currently active drive data set is monitored. The currently active drive data set is displayed in x = r0051, and the corresponding motor encoder is set in p0187[x].
Possible causes
Source: SINAMICS G210 Converter P1116
Series: S110
Load gearbox: Position tracking for the linear axis exceeded the maximum range
servo drive
Meaning: On the configured linear axis/non-modulo axis, the currently active motor encoder (encoder 1) has exceeded the maximum permissible travel range. The maximum travel range on the configured linear axis is 64 times p0421 (+/- 32 times). This range is read in p2721 and interpreted as the number of load revolutions.
Possible causes
Source: SINAMICS S110 P1018
Series: S120-S150
Load gearbox: Linear axis position tracking exceeded the maximum range
converter
Meaning: On the configured linear axis/non-modulo axis, the currently active motor encoder (encoder 1) has exceeded the maximum permissible travel range. The maximum travel range on the configured linear axis is 64 times p0421 (+/- 32 times). This range is read in p2721 and interpreted as the number of load revolutions.
Possible causes
Source: SINAMICS S120_S150 P2762
Series: S200
Load gearbox: Linear axis position tracking exceeded the maximum range
servo drive
Meaning: On the configured linear/non-modulo axis, the currently active motor encoder has exceeded the maximum permissible traversing range. The maximum traversing range on the configured linear axis is 64 times p0421 (+/- 32 times). This range can be read in p2721 and is interpreted as the number of load revolutions.
Possible causes
Source: SINAMICS S200 Pulse train input_SIMOTICS S-1FL2 P504