Siemens F01355 fault code meaning
Siemens / F01355
Series: DCM-6RA80
Topology: Actual topology has changed
DC drive
Meaning: The configured device topology (p0099) does not match the actual device topology (r0098). This fault occurs only when the topology is commissioned using the device's internal auto mechanism without a commissioning tool.
Possible causes
Source: SINAMICS DCM, Parameter Manual, firmware version 1.5 SP2 (based on 5.1 SP2) P959
Series: G120-CU250S-2
Topology: Actual topology has changed
converter
Meaning: The device topology setting (p0099) does not match the actual device topology (r0098). This fault occurs only when the topology is commissioned using the device's internal automation system without commissioning software.
Possible causes
Source: SINAMICS G120, Control Unit CU250S-2 P1299
Series: G130-G150, S120-S150
Topology: Actual topology has changed
converter
Meaning: The configured device topology (p0099) does not match the actual device topology (r0098). This fault occurs only when the topology is commissioned using the device's internal auto mechanism without a commissioning tool.
Possible causes
Source: SINAMICS G130_G150 P1463; SINAMICS S120_S150 P2540
Series: S110
Topology: Actual topology has changed
servo drive
Meaning: The device topology setting (p0099) does not match the actual device topology (r0098). This fault occurs only when the topology is commissioned using the device's internal automation system without commissioning software.
Possible causes
Source: SINAMICS S110 P942
Series: S220
Topology: Actual topology has changed
converter
Meaning: There is a mismatch between the device's configured topology and its actual topology. This fault occurs only when the topology is commissioned by the device's internal automation without using a commissioning tool.
Possible causes
Source: SINAMICS S220 converter P2090