Siemens F01107 fault code meaning
Siemens / F01107
Series: DCM-6RA80
CU: Failure to save to memory card
DC drive
Meaning: Cannot save to non-volatile memory. - Non-volatile memory is damaged. - Insufficient storage space in non-volatile memory.
Possible causes
Source: SINAMICS DCM, Parameter Manual, firmware version 1.5 SP2 (based on 5.1 SP2) P943
Series: G110M, G115D, G120-CU240B-E-2, G120C, G120D
Failure to save to memory card
converter
Meaning: Saving to the memory card failed. - The memory card is damaged. - The memory card has insufficient storage space.
Possible causes
Source: SINAMICS G110M P673; SINAMICS G115D P721; SINAMICS G120, Control Unit CU240B-2_CU240E-2 P698; SINAMICS G120C P648; SINAMICS G120D Control Unit CU240D- 2_CU250D- 2 P825
Series: G120-CU250S-2
CU: Failure to save to nonvolatile memory
converter
Meaning: Cannot save to non-volatile memory. - Non-volatile memory is damaged. - Insufficient storage space in non-volatile memory.
Possible causes
Source: SINAMICS G120, Control Unit CU250S-2 P1288
Series: G120X, G120XA
Failure to save to memory card
converter
Meaning: Saving to the memory card was unsuccessful. - The memory card is damaged. - There is insufficient storage space on the memory card.
Possible causes
Source: SINAMICS G120X converter P1356; SINAMICS G120XA PN converter P1271
Series: G130-G150, S120-S150
CU: Failure to save to memory card
converter
Meaning: Cannot save to non-volatile memory. - Non-volatile memory is damaged. - Insufficient storage space in non-volatile memory.
Possible causes
Source: SINAMICS G130_G150 P1447; SINAMICS S120_S150 P2523
Series: G200, G210, G210X, G220
Failure to save to memory card
converter
Meaning:
Possible causes
Source: SINAMICS G200 converter P616; SINAMICS G210 converter P988; SINAMICS G210X converter P856; SINAMICS G220 converter P1190
Series: S110
CU: Failure to save to nonvolatile memory
servo drive
Meaning: Cannot save to non-volatile memory. - Non-volatile memory is damaged. - Insufficient storage space in non-volatile memory.
Possible causes
Source: SINAMICS S110 P933
Series: S200
CU: Failure to save to memory card
servo drive
Meaning: Cannot save to non-volatile memory. - Non-volatile memory is damaged. - Insufficient storage space in non-volatile memory.
Possible causes
Source: SINAMICS S200 PROFINET_SIMOTICS S-1FL2 P459
Series: S220
CU: Failure to save to memory card
converter
Meaning: Cannot save to non-volatile memory. - Non-volatile memory is damaged. - Insufficient storage space in non-volatile memory.
Possible causes
Source: SINAMICS S220 converter P2072