Siemens F01054 fault code meaning
Siemens / F01054
Series: DCM-6RA80
CU: System limit exceeded
DC drive
Meaning: At least one system overload has occurred.
Possible causes
Source: SINAMICS DCM, Parameter Manual, firmware version 1.5 SP2 (based on 5.1 SP2) P936
Series: G110M, G115D, G120-CU240B-E-2, G120C, G120D, G120X, G120XA, G130-G150, S120-S150
CU: System limit exceeded
converter
Meaning: At least one system overload has occurred.
Possible causes
Source: SINAMICS G110M P671; SINAMICS G115D P718; SINAMICS G120, Control Unit CU240B-2_CU240E-2 P695; SINAMICS G120C P646; SINAMICS G120D Control Unit CU240D- 2_CU250D- 2 P823; SINAMICS G120X Converter P1354; SINAMICS G120XA PN Converter P1269; SINAMICS G130_G150 P1440; SINAMICS S120_S150 P2516
Series: G120-CU230P-2, G120P-Cabinet
System limits exceeded
converter
Meaning:
Possible causes
Source: Converter SINAMICS G120, equipped with control unit CU230P-2 P490; SINAMICS G120P Cabinet P509
Series: G120-CU250S-2
CU: System limit exceeded
converter
Meaning: System overload: Too many functions with high CPU utilization are being executed. At least one of the following requirements has not been met: - The "Position control" function module (r0108.3) must not be activated simultaneously with "Free function blocks" (r0108.18). - The "Basic positioner" function module (r0108.4) must not be activated simultaneously with "Free function blocks" (r0108.18). - When the "Free function blocks" function module (r0108.18) is activated, only 1 speed encoders may be operated.
Possible causes
Source: SINAMICS G120, Control Unit CU250S-2 P1285
Series: G200, G220
System limits exceeded
converter
Meaning:
Possible causes
Source: SINAMICS G200 converter P612; SINAMICS G220 converter P1186
Series: G210, G210X
System limits exceeded
converter
Meaning: At least one system overload has occurred.
Possible causes
Source: SINAMICS G210 converter P985; SINAMICS G210X converter P853
Series: S110
CU: System limit exceeded
servo drive
Meaning: At least one system overload has occurred.
Possible causes
Source: SINAMICS S110 P931
Series: S200
CU: System limits exceeded
servo drive
Meaning:
Possible causes
Source: SINAMICS S200 PROFINET_SIMOTICS S-1FL2 P455
Series: S220
CU: System limits exceeded
converter
Meaning: At least one system overload has occurred.
Possible causes
Source: SINAMICS S220 converter P2065