Siemens A50011 fault code meaning
Siemens / A50011
Series: DCM-6RA80
EtherNetIP/ communication board: configuration error
DC drive
Meaning: CBE20 EtherNet/IP: EhterNet/IP The controller is attempting to establish a connection using an incorrect configuration telegram. There is a mismatch between the telegram length configured in the controller and the parameter settings in the drive device.
Possible causes
Source: SINAMICS DCM, Parameter Manual, firmware version 1.5 SP2 (based on 5.1 SP2) P1206
Series: G110M, G120XA
EtherNet/IP: Configuration error
converter
Meaning: The EhterNet/IP controller is attempting to establish a connection using an incorrect configuration telegram. There is a mismatch between the telegram length set in the controller and the parameter settings in the drive device.
Possible causes
Source: SINAMICS G110M P756; SINAMICS G120XA PN converter P1330
Series: G115D, G120C, G120D
EtherNet/IP: Configuration error
converter
Meaning: The EtherNet/IP controller is attempting to establish a connection with an incorrectly configured telegram. The telegram length configured in the controller is a mismatch with the parameter settings in the drive unit.
Possible causes
Source: SINAMICS G115D P816; SINAMICS G120C P726; SINAMICS G120D Control Unit CU240D- 2_CU250D- 2 P956
Series: G120-CU240B-E-2
EtherNet/IP: Configuration error
converter
Meaning:
Possible causes
Source: SINAMICS G120 control unit CU240B- 2_CU240E- 2 P897
Series: G120-CU250S-2
EtherNet/IP: Configuration error
converter
Meaning: EtherNet/IP attempted to establish a connection using an incorrect configuration telegram. There is a mismatch between the telegram length set in the controller and the parameter settings in the drive device.
Possible causes
Source: SINAMICS G120, Control Unit CU250S-2 P1174
Series: G120X
EtherNet/IP: Configuration error
converter
Meaning: The EhterNet/IP controller is attempting to establish a connection using an incorrectly configured telegram. There is a mismatch between the telegram length set in the controller and the parameter setting in the drive. Alarms, faults, and system messages 10.6 List of fault codes and alarm codes SINAMICS G120X converter 1418 Operating Instructions, 06/2021, FW V1.04, A5E44751209F AF
Possible causes
Source: SINAMICS G120X converter P1420
Series: S120-S150
EtherNetIP/ communication board: configuration error
converter
Meaning:
Possible causes
Source: SINAMICS S120 Communication Function Manual P217