Siemens A07922 fault code meaning

Series: G110M, G115D, G120-CU240B-E-2, G120-CU250S-2, G120D

Drive: Torque/speed out of tolerance

converter

Meaning: When p2193 = 1: The torque deviates from the torque/speed envelope. When p2193 = 2: The external encoder speed signal (see p3230) deviates from the speed (r2169).

Possible causes

Source: SINAMICS G110M P717; SINAMICS G115D P775; SINAMICS G120, Control Unit CU240B-2_CU240E-2 P745; SINAMICS G120, Control Unit CU250S-2 P1421; SINAMICS G120D Control Unit CU240D- 2_CU250D- 2 P897

Series: G120-CU230P-2, G120C, G120P-Cabinet

Torque/speed outside tolerance range

converter

Meaning:

Possible causes

Source: Converter SINAMICS G120, equipped with control unit CU230P-2 P495; converter SINAMICS G120C P406; SINAMICS G120P Cabinet P513

Series: G120X, G120XA

Drive: Torque/speed tolerance exceeded

converter

Meaning: When p2193 = 1: The torque deviates from the torque/speed envelope. When p2193 = 2: The speed signal from the external encoder (see p3230) deviates from the speed (r2169).

Possible causes

Source: SINAMICS G120X Converter P1390; SINAMICS G120XA PN Converter P1301

Series: G130-G150, S120-S150

Drive: Torque/speed out of tolerance

converter

Meaning: The torque deviates from the torque/speed envelope.

Possible causes

Source: SINAMICS G130_G150 P1672; SINAMICS S120_S150 P2825

Series: G200, G210, G220, S220

Drive: Torque/speed tolerance exceeded

converter

Meaning: When p2193 = 1: The torque deviates from the torque/speed envelope. When p2193 = 2: The speed signal from the external encoder (see c3230) deviates from the speed (r2169).

Possible causes

Source: SINAMICS G200 converter P725; SINAMICS G210 converter P1159; SINAMICS G220 converter P1377; SINAMICS S220 converter P2363

Series: G210X

Torque/speed tolerance exceeded

converter

Meaning:

Possible causes

Source: SINAMICS G210X Converter P356

Series: S110

Drive: Torque/speed out of tolerance

servo drive

Meaning: The torque deviates from the torque/speed envelope.

Possible causes

Source: SINAMICS S110 P1054

Series: S200

Drive: Torque/speed tolerance exceeded

servo drive

Meaning: The torque is outside the torque/speed envelope.

Possible causes

Source: SINAMICS S200 PROFINET_SIMOTICS S-1FL2 P542