Siemens A07569 fault code meaning

Series: G120-CU250S-2

Encoder cannot be detected

converter

Meaning: The encoder cannot be detected during encoder detection (waiting) with p0400 = 10100. Possible causes are an incorrect or missing encoder, an encoder cable that is not plugged into the encoder module or an incorrect encoder cable, or a DRIVE-CLiQ component that is not connected to DRIVE-CLiQ.

Possible causes

Source: SINAMICS G120, Control Unit CU250S-2 P1402

Series: G120D

Encoder identification active

converter

Meaning: The encoder still cannot be identified during encoder identification (waiting) with p0400 = 10100. Possible causes include an incorrect or missing encoder, a missing or incorrect encoder cable plugged into the encoder module, or a disconnected DRIVE-CLiQ component.

Possible causes

Source: SINAMICS G120D Control Unit CU240D- 2_CU250D- 2 P886

Series: G220

Encoder identification active

converter

Meaning:

Possible causes

Source: SINAMICS G220 Converter P1358

Series: S110

Encoder cannot be detected

servo drive

Meaning: No encoder can be detected during encoder detection (waiting) with p0400 = 10100. Possible causes include an incorrect or missing encoder, a missing or incorrect encoder cable at the encoder module, or a DRIVE-CLiQ component that is not connected to DRIVE-CLiQ.

Possible causes

Source: SINAMICS S110 P1039

Series: S200, S210

Encoder identification active

servo drive

Meaning: The encoder still cannot be identified during encoder identification (waiting) with p0400 = 10100. Possible causes include an encoder error, a missing encoder, a disconnected encoder cable, or an incorrect encoder cable connected.

Possible causes

Source: SINAMICS S200 PROFINET_SIMOTICS S-1FL2 P537; SINAMICS S210_SIMOTICS S-1FK2 and S-1FT2 P1336