Siemens A01069 fault code meaning
Siemens / A01069
Series: DCM-6RA80
Parameter backup file is incompatible with the device
DC drive
Meaning: The parameter backup on the memory card does not match the drive device. The components will start with factory settings. Example: Device A is incompatible with B, and a memory card containing a parameter backup for device A has been inserted into device B.
Possible causes
Source: SINAMICS DCM, Parameter Manual, Firmware Version 1.5 SP2 (based on 5.1 SP2) P939
Series: G110M, G115D, G120-CU240B-E-2, G120C, G120D, G120X, G120XA, G130-G150, S120-S150
Parameter backup file is incompatible with the device
converter
Meaning: The parameter backup on the memory card does not match the drive device. The components will start with factory settings. Example: Device A is incompatible with B, and a memory card containing a parameter backup for device A has been inserted into device B.
Possible causes
Source: SINAMICS G110M P672; SINAMICS G115D P720; SINAMICS G120, control unit CU240B-2_CU240E-2 P697; SINAMICS G120C P647; SINAMICS G120D control unit CU240D- 2_CU250D- 2 P824; SINAMICS G120X converter P1355; SINAMICS G120XA PN converter P1270; SINAMICS G130_G150 P1443; SINAMICS S120_S150 P2519
Series: G120-CU250S-2
Parameter backup file is incompatible with the device
converter
Meaning: The parameter backup on the memory card or in the drive does not match the drive or its control mode (vector control or servo control). The component starts with factory settings. Example: Device A is incompatible with B, and a memory card containing a parameter backup for device A has been inserted into device B.
Possible causes
Source: SINAMICS G120, Control Unit CU250S-2 P1286
Series: G200, G210, G210X, G220, S220
The parameter backup on the memory card is incompatible
converter
Meaning: The parameter backup on the memory card does not match the converter. If a valid internal data backup exists, the converter loads it at power-on. Examples: The parameter backup version on the memory card is newer than the device firmware version. The parameter backup on the memory card contains a different product type.
Possible causes
Source: SINAMICS G200 converter P613; SINAMICS G210 converter P985; SINAMICS G210X converter P853; SINAMICS G220 converter P1187; SINAMICS S220 converter P2068
Series: S110
Parameter backup file is incompatible with the device
servo drive
Meaning: The parameter backup file on the memory card is incompatible with the device type. For example, a memory card containing a parameter backup for SINAMICS S120 was inserted into SINAMICS G150. The component starts with the factory settings.
Possible causes
Source: SINAMICS S110 P932
Series: S200
The parameter backup on the memory card is incompatible
servo drive
Meaning: The parameter backup on the memory card does not match the converter. If a valid internal data backup exists, the converter loads it at power-on. Examples: The parameter backup version on the memory card is newer than the device firmware version. The parameter backup on the memory card contains a different product type.
Possible causes
Source: SINAMICS S200 PROFINET_SIMOTICS S-1FL2 P456
Series: S210
Parameter backup file is incompatible with the device
servo drive
Meaning: There is a mismatch between the parameter backup on the memory card and the drive unit. The component starts with factory settings. Example: Device A is incompatible with B, and a memory card containing a parameter backup for device A is inserted in device B. Faults and alarms 15.2 List of faults and alarms SINAMICS S210 Servo Drive System 450 Operating Instructions, 01/2019, A5E41702836F AC
Possible causes
Source: SINAMICS S210_SIMOTICS S-1FK2 P452