Inovance EE09.3 fault code meaning
Inovance / EE09.3
Series: STD60N-XH, STD60N
Homing mode setting error warning
stepper drive
Meaning: When servo communication switches to the OP status, MCU does not receive a synchronization signal.
Possible causes
- 1.EtherCAT Communication ports IN and OUT are connected in reverse. 2. The master communication configuration is incorrect, and the communication synchronization clock is not configured correctly. 3. The slave controller chip is damaged. 4.MCU The pin is damaged.
Source: STD60N-XH Series Stepper User Manual P286; STD60N Series Stepper User Manual P389
Series: SV630N
No synchronization signal
servo drive
Meaning:
Possible causes
Source: SV630N Series Servo User Manual P533
Series: SV670N-LK, SV670N-PTC
Homing mode setting error warning
servo drive
Meaning: When servo communication switches to the OP status, MCU does not receive a synchronization signal.
Possible causes
- 1.Master communication configuration error; the communication synchronization clock was not configured correctly
- 2.EtherCATCommunication ports IN and OUT are connected in reverse
- 3.Slave controller chip damaged
- 4.MCUPin damaged
Source: SV670N-LK Series Servo User Manual P634; SV670N-PTC Series Servo User Manual P611
Series: SV670NS-INT
No synchronization signal
servo drive
Meaning: When servo communication switches to the OP status, MCU does not receive a synchronization signal.
Possible causes
- 1.Master communication configuration error; the communication synchronization clock was not configured correctly
- 2.EtherCATCommunication ports IN and OUT are connected in reverse
- 3.Slave controller chip damaged
- 4.MCUPin damaged
Source: SV670NS-INT Series Servo User Manual (SIL2 Safety Version) P944