Inovance 2-8 fault code meaning
Inovance / 2-8
Series: MD880
Phase W hardware overcurrent
AC drive
Meaning:
Possible causes
- The selected drive is undersized.
- There is a ground fault or short circuit in the drive output circuit.
- The manual torque boost setting is unsuitable; the V/f curve is unsuitable.
- The motor is started while it is rotating.
- FVC encoder feedback signal error during run.
- The motor cable is too long.
- The DC bus voltage is low.
- The motor parameter settings are incorrect.
- Hall circuit error.
- Peripheral error.
- Other causes: 1.A capacitive load is connected to the output. 2.A transformer or filter is connected to the output.
Source: MD880 Series AC Drive Function Manual (HCU) P600