Inovance 2-6 fault code meaning
Inovance / 2-6
Series: MD880
Phase U hardware overcurrent
AC drive
Meaning:
Possible causes
- The selected drive is undersized.
- There is a ground fault or short circuit in the drive output circuit.
- The motor is started in FVC or SVC control mode without performing auto-tuning.
- Acceleration/deceleration time is set too short for rapid acceleration and deceleration.
- The manual torque boost setting is unsuitable; the V/f curve is unsuitable.
- The motor is started while it is rotating.
- FVC encoder feedback signal error during run.
- The motor cable is too long.
- The DC bus voltage is low.
- The motor parameter settings are incorrect.
- Hall circuit error.
- Peripheral error.
- Other causes: A capacitive load is connected to the 1. output. A transformer or filter is connected to the 2. output.
Source: MD880 Series AC Drive Function Manual (HCU) P598