ABB 64B2 fault code meaning
ABB / 64B2
Series: ACH531, ACQ531
User set fault
drive
Meaning: User parameter set loading failure due to one of the following: • The requested set does not exist. • The set is incompatible with the control program. • The drive lost power during loading.
Possible causes
Source: ACH531 Firmware Manual P139; ACQ531 Firmware Manual P121
Series: ACH580, ACS530
User group fault
drive
Meaning: Loading the user parameter set failed because: • The requested set does not exist. • The set is incompatible with the control program. • The drive was switched off during loading.
Possible causes
Source: ACH580 HVAC Control Program Firmware Manual P287; ACS530 Firmware Manual P274
Series: ACM510-V, ACS580
User parameter set fault
drive
Meaning: User parameter set loading failure because the requested parameter set does not exist, the parameter set is incompatible with the control program, or the drive was powered off during loading.
Possible causes
Source: ACM510-01V_04V Drive Firmware Manual P409; ACS580 Standard Control Program Firmware Manual P541
Series: ACQ580
User set fault
drive
Meaning: User parameter set loading failure because the requested set does not exist, the set is incompatible with the control program, or the drive lost power during loading.
Possible causes
Source: ACQ580 Pump Control Program Firmware Manual P197
Series: ACS180
User set fault
drive
Meaning: Failure to load the user parameter set because: • The requested set does not exist. • The set is incompatible with the control program. • The drive was powered off during loading.
Possible causes
Source: ACS180 Machine Control Program Firmware Manual P322
Series: ACS280
User parameter set fault
drive
Meaning: User parameter set loading failed because the requested parameter set does not exist, the parameter set is incompatible with the control program, or the drive was powered off during loading.
Possible causes
Source: ACS280 Firmware Manual P345
Series: ACS380
User set fault
drive
Meaning: Loading the user parameter set failed because: • The requested set does not exist. • The set is incompatible with the control program. • The drive was powered off during loading.
Possible causes
Source: ACS380 Machinery Control Program Firmware Manual P442
Series: ACS580MV
User parameter set fault
drive
Meaning: User parameter group loading failed because the requested parameter set does not exist, the group is incompatible with the control program, or the drive was switched off during loading.
Possible causes
Source: ACS580MV Firmware Manual P336
Series: ACS860
User setting fault
drive
Meaning: Failure to load the user parameter settings because the requested settings do not exist, the settings are incompatible with the control program, or the drive lost power during loading. Ensure that valid user parameter settings exist.
Possible causes
Source: ACS860 Basic Control Program Firmware Manual P312
Series: ACS880
User set fault
drive
Meaning: User parameter set loading failure because the parameter set is incompatible with the control program.
Possible causes
Source: ACS880 Basic Control Program Firmware Manual P474
Series: ACS880-M04
User parameter set fault
drive
Meaning: User parameter set loading failure due to: • The requested parameter set does not exist. • The parameter set is incompatible with the control program. • The drive was powered off during loading.
Possible causes
Source: ACS880-M04 Machinery Control Program Firmware Manual P437
Series: ACS880-MARINE
User setting fault
drive
Meaning: User parameter set loading failure because the requested set does not exist, the set is incompatible with the control program, or the drive lost power during loading. Ensure that a valid user parameter set exists.
Possible causes
Source: ACS880 Light Marine P328
Series: ACS880-POS
User parameter set fault
drive
Meaning: Loading the user parameter set failed because the set is incompatible with the control program or the drive was switched off during loading.
Possible causes
Source: ACS880 Position Control Program P462
Series: ACS880-WINCH
User parameter set fault
drive
Meaning: User parameter set loading failed because the requested parameter set does not exist, the set is incompatible with the control program, or the drive was powered off during loading.
Possible causes
Source: ACS880 Winch Control Program P568