ABB 2008 fault code meaning
ABB / 2008
Series: ACH550
Control panel communication loss
drive
Meaning: Control panel communication loss: • The drive is in local control mode (the control panel displays HAND), or • The drive is in remote control mode (AUTO), and the relevant parameters are set to accept start/stop/direction/reference signals from the control panel.
Possible causes
Source: ACH550-01 Drive User Manual P381
Series: ACL30
Motor identification run enabled.
drive
Meaning: Motor identification run is enabled.
Possible causes
Source: ACL30 Elevator Drive User Manual P269
Series: ACS310
Control panel loss
drive
Meaning: Fault function 3002). The control panel selected as the active control location has stopped communicating.
Possible causes
Source: ACS310 User Manual P290
Series: ACS350
Control panel loss
drive
Meaning: The control panel is the current control location, and control panel communication is interrupted.
Possible causes
Source: ACS350 User Manual P247
Series: ACS355
Communication with the control panel selected as the valid control location has been interrupted
drive
Meaning: Communication with the control panel selected as the active control location has stopped.
Possible causes
Source: ACS355 User Manual P337
Series: ACS510
Control panel loss
drive
Meaning: Control panel communication loss: The drive is in local control mode (the control panel displays LOC), or the drive is in remote control mode (REM) and the relevant parameters are set to accept start/stop/direction/reference signals from the control panel.
Possible causes
Source: ACS510-01_U1 User Manual P202
Series: ACS550
Control panel loss
drive
Meaning: Control panel communication loss: • The drive is in local control mode (the control panel displays LOC); or • The drive is in remote control mode (REM), and the relevant parameters are set to accept start/stop/direction/reference signals from the control panel.
Possible causes
Source: ACS550-01_U1 User Manual P245