ABB 00FA fault code meaning
ABB / 00FA
Series: ACH531, ACQ531, ACQ580
Due to an improper minimum/maximum frequency setting
drive
Meaning: ... the motor exceeds the maximum permitted frequency, or the motor spins rapidly because the supply voltage is too high or an incorrect supply voltage is selected in parameter 95.01 Supply voltage.
Possible causes
Source: ACH531 Firmware Manual P141; ACQ531 Firmware Manual P123; ACQ580 Pump Control Program Firmware Manual P199
Series: ACM510-V, ACS580
Because the minimum/maximum frequency setting is not
drive
Meaning: The motor is rotating above the maximum permitted frequency, or is rotating rapidly because the supply voltage is too high or the supply voltage selected by parameter 95.01 Supply voltage is incorrect.
Possible causes
Source: ACM510-01V_04V Drive Firmware Manual P410; ACS580 Standard Control Program Firmware Manual P544
Series: ACS180
Due to an improper minimum/maximum frequency setting
drive
Meaning: The motor rotates above the maximum permitted frequency, or the motor accelerates rapidly because the supply voltage is too high or an incorrect supply voltage has been selected in parameter 95.01 Supply voltage.
Possible causes
Source: ACS180 Machine Control Program Firmware Manual P324
Series: ACS280
Motor rotational speed exceeded the allowable frequency
drive
Meaning: ...frequency upper limit, due to incorrect minimum/maximum frequency settings or motor stall caused by excessively high supply voltage or an incorrect value for parameter 95.01 Supply voltage.
Possible causes
Source: ACS280 Firmware Manual P346
Series: ACS380
Due to an incorrect minimum/... setting
drive
Meaning: High frequency. The motor rotates above the maximum permitted frequency, or the motor accelerates rapidly because the supply voltage is too high or an incorrect supply voltage has been selected in parameter 95.01 Supply voltage.
Possible causes
Source: ACS380 Machinery Control Program Firmware Manual P445
Series: ACS530
Motor speed exceeded the maximum limit frequ...
drive
Meaning: ...frequency, possibly because the minimum/maximum frequency settings are incorrect, the supply voltage is too high and causes the motor to rotate, or an incorrect supply voltage is selected in parameter 95.01.
Possible causes
Source: ACS530 Firmware Manual P277