ABB 0024 fault code meaning
ABB / 0024
Series: ACH531, ACQ531, ACQ580, ACS580, ACS880-M04
Other
drive
Meaning:
Possible causes
Source: ACH531 Firmware Manual P139; ACQ531 Firmware Manual P121; ACQ580 Pump Control Program Firmware Manual P197; ACS580 Standard Control Program Firmware Manual P541; ACS880-M04 Machinery Control Program Firmware Manual P437
Series: ACL30
The temperature of the interface board (between the power supply unit and the control unit) has exceeded the internal fault
drive
Meaning: The temperature of the interface board (between the power supply unit and the control unit) has exceeded the internal fault limit.
Possible causes
Source: ACL30 Elevator Drive User Manual P278
Series: ACS180, ACS280
Program file and current firmware version do not...
drive
Meaning: Compatible.
Possible causes
Source: ACS180 Machinery Control Program Firmware Manual P322; ACS280 Firmware Manual P344
Series: ACS310
Overspeed
drive
Meaning: The motor speed has exceeded the maximum permitted speed due to incorrect minimum/maximum speed settings.
Possible causes
Source: ACS310 User Manual P297
Series: ACS350
Overspeed
drive
Meaning: The motor speed exceeds the maximum allowed speed due to incorrect minimum/maximum speed settings, braking torque that is too small, or a sudden load change.
Possible causes
Source: ACS350 User Manual P252
Series: ACS355
Due to incorrect maximum/minimum speed settings, braking torque that is too small, or
drive
Meaning: Motor speed exceeds 120% of the maximum permitted speed due to incorrect maximum/minimum speed settings, braking torque too small, or a change in load while using a torque reference.
Possible causes
Source: ACS355 User Manual P346
Series: ACS380-E
Program file is incompatible with the current firmware version
drive
Meaning: Adapt the program to the current function block library and firmware version.
Possible causes
Source: ACS380-E Machinery Control Program Firmware Manual P315
Series: ACS530
–Contact your local ABB representative
drive
Meaning:
Possible causes
Source: ACS530 Firmware Manual P274
Series: ACS880
Fault
drive
Meaning:
Possible causes
Source: ACS880 Basic Control Program Firmware Manual P473
Series: DCS880
Cannot tune the speed controller, speed feedback assistant, or tachogenerator... due to the speed limit.
DC drive
Meaning: Refer to 30.11 M1 minimum speed and 30.12 M1 maximum speed.
Possible causes
Source: DCS880 Firmware Manual_ 3ADW000474R P371