ABB 000D fault code meaning
ABB / 000D
Series: ACH531, ACQ531, ACQ580, ACS530
(Permanent magnet motors only)
drive
Meaning: The second acceleration cannot be completed within a reasonable time.
Possible causes
Source: ACH531 Firmware Manual P145; ACQ531 Firmware Manual P126; ACQ580 Pump Control Program Firmware Manual P204; ACS530 Firmware Manual P281
Series: ACM510-V, ACS180, ACS280, ACS380, ACS580
(Permanent magnet motors only)
drive
Meaning: The second acceleration was not completed within a reasonable time.
Possible causes
Source: ACM510-01V_04V Drive Firmware Manual P413; ACS180 Machinery Control Program Firmware Manual P326; ACS280 Firmware Manual P350; ACS380 Machinery Control Program Firmware Manual P448; ACS580 Standard Control Program Firmware Manual P547
Series: ACS580MV
- Capacitor reforming
drive
Meaning:
Possible causes
Source: ACS580MV Firmware Manual P320
Series: ACS880
The encoder reports overspeed or, due to overspeed,
drive
Meaning: Resulting in reduced resolution.
Possible causes
Source: ACS880 Basic Control Program Firmware Manual P462
Series: ACS880-M04
(Permanent magnet motors only) Not within a reasonable
drive
Meaning: Complete the second acceleration within the specified time.
Possible causes
Source: ACS880-M04 Machinery Control Program Firmware Manual P444
Series: ACS880-POS, ACS880-WINCH
Encoder reports overspeed or reduced resolution due to overspeed
drive
Meaning:
Possible causes
Source: ACS880 Position Control Program P450; ACS880 Winch Control Program P556
Series: DCS880
Encoder reports overspeed or reduced resolution due to overspeed
DC drive
Meaning:
Possible causes
Source: DCS880 Firmware Manual_3ADW000474R P365