ABB 0007 fault code meaning
ABB / 0007
Series: ACH531, ACQ531, ACQ580, ACS530
Rated power and rated speed and torque are not
drive
Meaning: Consistent.
Possible causes
Source: ACH531 Firmware Manual P128; ACQ531 Firmware Manual P110; ACQ580 Pump Control Program Firmware Manual P184; ACS530 Firmware Manual P262
Series: ACM510-V, ACS580
Rated power, rated speed, and torque do not
drive
Meaning: Consistent.
Possible causes
Source: ACM510-01V_04V Drive Firmware Manual P400; ACS580 Standard Control Program Firmware Manual P526
Series: ACS310
AI1 loss
drive
Meaning: The analog input AI1 signal is below the limit defined by parameter 3021 AI1 FAULTLIMIT.
Possible causes
Source: ACS310 User Manual P295
Series: ACS350
Loss
drive
Meaning: 3001, 3021) Analog input AI1 is below the limit defined by parameter 3021AI1 FAULT LIMIT.
Possible causes
Source: ACS350 User Manual P250
Series: ACS355
Analog input AI1 signal is below the level set by parameter 3021 AI
drive
Meaning: The analog input AI1 signal is below the limit defined by parameter 3021 AI1 FAULTLIMIT.
Possible causes
Source: ACS355 User Manual P343
Series: ACS380
Rated power and rated speed and torque
drive
Meaning: Mismatch.
Possible causes
Source: ACS380 Machinery Control Program Firmware Manual P429
Series: ACS380-E
Mismatch between rated power and rated speed and torque
drive
Meaning: Warning: Parameters in group 99 have not been set.
Possible causes
Source: ACS380-E Machinery Control Program Firmware Manual P324
Series: ACS580MV
- Door interlock monitoring test
drive
Meaning:
Possible causes
Source: ACS580MV Firmware Manual P320
Series: ACS860, ACS880-M04, ACS880
Speed conversion error
drive
Meaning:
Possible causes
Source: ACS860 Primary Control Program Firmware Manual P304; ACS880-M04 Machinery Control Program Firmware Manual P424; ACS880 Primary Control Program Firmware Manual P462
Series: ACS880-POS, ACS880-WINCH
Speed conversion error
drive
Meaning:
Possible causes
Source: ACS880 Position Control Program P449; ACS880 Winch Control Program P556