ABB 0003 fault code meaning
ABB / 0003
Series: ACH531, ACQ531, ACQ580
Rated speed is higher than the synchronous speed for one pole pair
drive
Meaning: Speed.
Possible causes
Source: ACH531 Firmware Manual P128; ACQ531 Firmware Manual P110; ACQ580 Pump Control Program Firmware Manual P184
Series: ACH580, ACM510-V, ACS530, ACS580
Relay output 3
drive
Meaning:
Possible causes
Source: ACH580 HVAC Control Program Firmware Manual P281; ACM510-01V_04V Drive Firmware Manual P402; ACS530 Firmware Manual P265; ACS580 Standard Control Program Firmware Manual P529
Series: ACM510-S, ACP510
The overload point is lower than the underload point.
drive
Meaning:
Possible causes
Source: ACM510-01S_04S Drive Firmware Manual P358; ACP510 Standard Control Program Firmware Manual P358
Series: ACS310
Drive overtemperature
drive
Meaning: Drive IGBT overtemperature.
Possible causes
Source: ACS310 User Manual P295
Series: ACS350
Overtemperature
drive
Meaning: Drive IGBT overtemperature.
Possible causes
Source: ACS350 User Manual P250
Series: ACS355
Drive IGBT temperature high
drive
Meaning: Drive IGBT temperature is high.
Possible causes
Source: ACS355 User Manual P342
Series: ACS380
Rated speed is higher than the synchronous speed for 1 pole pairs
drive
Meaning: Speed.
Possible causes
Source: ACS380 Machinery Control Program Firmware Manual P429
Series: ACS380-E
Rated speed exceeds the synchronous speed for 1 pole pairs
drive
Meaning:
Possible causes
Source: ACS380-E Machinery Control Program Firmware Manual P324
Series: ACS580MV
- Motor parameters entered
drive
Meaning:
Possible causes
Source: ACS580MV Firmware Manual P320
Series: ACS860, ACS880-M04
Overspeed
drive
Meaning:
Possible causes
Source: ACS860 Primary Control Program Firmware Manual P304; ACS880-M04 Machinery Control Program Firmware Manual P423
Series: ACS880-MARINE, ACS880-POS, ACS880-WINCH, ACS880
Short circuit
drive
Meaning:
Possible causes
Source: ACS880 Light Marine P314; ACS880 Position Control Program P441; ACS880 Winch Control Program P547; ACS880 Basic Control Program Firmware Manual P453
Series: DCS880
Overload point below underload
DC drive
Meaning: point (Overload point below underload point).
Possible causes
Source: DCS880 Firmware Manual_3ADW000474R P358