Xichi fault codes
Fault codes
- 01 Main power supply phase loss
- 02 Phase sequence error
- 03 Parameter loss
- 04 Motor overload
- 05 Run overcurrent
- 06 Motor underload
- 07 Phase current imbalance
- 08 SCR overheat
- 09 Internal inhibited
- 10 Start timeout
- E002 Main power supply fault
- E003 Overcurrent
- E004 Load disconnected
- Er01 Acceleration overcurrent during operation
- Er02 Deceleration overcurrent during operation
- Er03 Overcurrent during constant-speed operation
- Er04 Acceleration overvoltage during operation
- Er05 Deceleration overvoltage during operation
- Er06 Overvoltage during constant-speed operation
- Er07 Overvoltage at stop
- Er08 Run undervoltage
- Er09 Input phase loss
- Er10 Output phase loss
- Er12 Heatsink overheat
- Er13 Inverter overload
- Er14 Motor overload
- Er15 External device fault
- Er16 Current detection fault
- Er17 Ground fault
- Er18 EEPROM read/write error
- Er20 Keypad communication error
- Er21 Interference
- Er22 PID feedback fault
- Err08 Control power fault
- Err09 Undervoltage
- Err1 Input phase loss
- Err11 Motor overload
- Err12 Input phase loss
- Err13 Output phase loss
- Err14 Module overheat
- Err15 External device fault
- Err16 Communication error
- Err2 Output ground fault
- Err20 Encoder disc fault
- Err21 Read/write error
- Err3 Current detection fault
- Err30 Load loss fault
- Err31 PID feedback loss fault during operation
- Err4 Inverter external fault
- Err5 Traverse operation parameter setting error
- Err51 Initial position fault
- Err6 Communication error
- LIFE Trial period ended
- LU1 Supply voltage too low at stop
- LU2 Supply voltage too low during operation
- S.C Module fault
- Sen Feedback sensor fault
- o.C.1 Acceleration overcurrent
- o.C.2 Deceleration overcurrent
- o.C.3 Constant speed overcurrent
- o.H. Inverter internal overheat
- o.L.1 Motor overload
- o.L.2 Inverter overload
- o.U.1 Acceleration overvoltage
- o.U.2 Deceleration overvoltage
- o.U.3 Constant speed overvoltage
- o.U.4 Stop overvoltage